Machine tap
HSS Cobalt 5% machine taps for bottoming holes are made from alloyed high speed steel. With adding Cobalt the taps gets an extremely high hardness which enables them to cut in steel types which are difficult to cut. Full grinding during the production process results in a very sharp tap with high precision. In combination with cutting oil this will result in a very long tool life. Very suitable for tapping bottoming threads in alloyed steels and steels which are difficult to cut such as stainless steel (inox).
Technical specificaties:
size = M30
DIN 376
connection = square
material = HSS - Co5%
intersection angle = point
right hand
fully ground
M35 steel
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
| Dimensions du produit : | |
|---|---|
| Longueur du produit | 185 mm |
| Largeur du produit | 35 mm |
| Hauteur du produit | 35 mm |
| Poids du produit | 0,52 Kg |
| Dimensions de l'emballage : | |
| Longueur du paquet | 185 mm |
| Largeur du paquet | 35 mm |
| Hauteur du paquet | 35 mm |
| Poids du Colis | 0,00 Kg |